Safariland

Safariland APEX™ System kit consisting of the APEX carrier and one general-sized SX™ Level IIIA front soft ballistic panel. The APEX carrier features a 4-piece floating architecture with...

The Safariland 6360RDS is a mid-ride duty holster built for a Glock 19 MOS with a red dot mounted. This SKU, 6360RDS-283-61, is the plain black, right-hand, no-light configuration. ALS and SLS work...

Duty-rated Level III retention holster for a red-dot Sig Sauer with a full-size weapon light. The 6365RDS is the low-ride version of Safariland’s ALS/SLS RDS series: the SLS rotating hood and...

LE/MIL- Restricted item - special order only, 4–6 week lead time. The PROTECH® Shield Support Hook is designed to reduce load-carrying fatigue during extended shield deployment by...

LE/MIL- Restricted item - special order only, 4–6 week lead time. The PROTECH® Shield Hood Viewport is a protective covering designed specifically for ballistic shield viewports...

LE/MIL- Restricted item - special order only, 4–6 week lead time. The PROTECH® Viewport Lens 3-Layer Tear Away Kit provides laminated tear-off protection for the viewports on both X-Series...

LE/MIL- Restricted item - special order only, 4–6 week lead time. The PROTECH® Shield Carry Bag is a durable Cordura carrying solution designed for both ballistic and non-ballistic shields...

LE/MIL- Restricted item - special order only, 4–6 week lead time. The FoxFury® Taker series of low-profile, front-mounted ballistic shield lights is available through PROTECH® Tactical...

The PROTECH® Tactical Phoenix IV™ is an NIJ 0108.01 Type IV ballistic shield engineered to defeat the 7.62mm, 166 gr. armor-piercing .30-06 round. This heavy-duty shield is constructed from...

Safariland is taking the bestselling Level III rated Assault VP shield line to the next level with the PROTECH® Assault III VP. Offered in a larger 20" x 36" cut and starting at approximately 26...

A modern take on the widely known Assault line of shields, the PROTECH® Assault II VP integrates lightweight Level III protection with a triangular ballistic viewport capable of stopping 7.62 x...

The PROTECH® Assault LW series represents the next generation of Assault Shields, integrating NIJ Level III rifle protection into a lightweight profile. Utilizing the latest UHMWPE materials from...

The PROTECH® Tactical Model 3910 Ballistic Blanket is an NIJ 0108.01 Type IIIA roll-up soft armor solution that has also been tested against MIL-STD-662F for fragmentation. Constructed from woven...

The PROTECH® Tactical Strike Shield is an NIJ 0108.01 Type IIIA roll-up soft armor shield ideal for patrol use. Easily stored in a car trunk, it delivers reliable protection and maneuverability...

The PROTECH® Tactical TSI family of shields features a flat design with a low-profile, ambidextrous collapsible handle for easy storage and transport. These lightweight Type IIIA ballistic...

From PROTECH® Tactical, the leader in ballistic shield manufacturing, the Mighty Mite X is the smallest and lightest model in the innovative X Series of ultra-lightweight Type IIIA ballistic...

From PROTECH® Tactical, the leader in ballistic shield manufacturing, the Defender X is a mid-sized model in the innovative X Series of ultra-lightweight Type IIIA ballistic shields. Built with a...

From PROTECH® Tactical, the leader in ballistic shield manufacturing, the Entry II X is the largest model in the innovative X Series of ultra-lightweight Type IIIA ballistic shields. Built with a...

From PROTECH® Tactical, the leader in ballistic shield manufacturing, the Entry I X is part of the innovative X Series of ultra-lightweight Type IIIA ballistic shields. Built with a...

PROTECH® Entry I FR X Type IIIA Tactical Ballistic Shield – 24" × 36" The Entry I FR X is a lightweight X-Series first-responder ballistic shield designed for high-speed entries and...

PROTECH® Intruder™ G2 Type IIIA Tactical Ballistic Shield – 20" × 34" The Intruder™ G2 is a mid-sized Level IIIA ballistic shield designed for high-speed entries and...

Police Trade-In Holster Lot – 5 Black Leather Basketweave Holsters (LH/RH Mix) – As-Is Complete lot of 5 used police trade-in leather holsters in black basketweave finish. Mix of...

The Safariland V1 Overt Carrier is an ultra-lightweight front or side overt/external carrier designed with a modern aesthetic for law enforcement and tactical use. Constructed from Invista 100% 500...

Safariland V1 Overt/External Carrier – Side Opening with Advanced Webless System SKU: SBA-V1-SIDE-AWS SBA-G V1 AWS VCS Carrier SIZE 2817-2616 Modern side-opening overt/external carrier...

The Hardwire IMPAC C1.4 is a Type III+ In-Conjunction-With (ICW) hard armor plate designed for reliable rifle-threat protection when paired with compatible soft armor. Available in a full range of...

The PROTECH X-CAL AP is a Type IV In-Conjunction-With (ICW) hard armor plate composed of a lightweight ceramic and glass composite finished with an advanced polyurea coating. Designed for...

The PROTECH 9812-R1 is a stand-alone armor-piercing hard armor plate tested to the NIJ 0101.04 Type IV protocol. Designed as a high-end lightweight Level IV solution, the SAPI-sized plates feature a...

The PROTECH SN106C is a Type IV stand-alone hard armor plate offering armor-piercing protection in a multi-curve design. Independently tested to NIJ 0101.06 standards, it defeats the 7.62 x 63mm 166...

The Hardwire RF2 Type III+ ICW (In-Conjunction-With) ballistic plates deliver enhanced rifle-threat protection when paired with compatible soft armor. Designed for tactical and law enforcement...

The Hardwire RF1 Type III ICW (In-Conjunction-With) ballistic plates deliver reliable rifle-threat protection when paired with compatible soft armor. Designed for tactical and law enforcement use,...

The PROTECH DT306P is an ultra-lightweight stand-alone Type III hard armor plate independently tested to NIJ 0101.06 standards. Capable of defeating the 7.62 x 51mm M80 round along with several...

The Hardwire 2100 Series Type III+ stand-alone ballistic plates deliver reliable rifle-threat protection in a lightweight, multi-curve design suited for tactical, law enforcement, and professional...

The PROTECH X-CAL DT P1 In-Conjunction-With plate delivers high-end, lightweight protection designed for superior ballistic performance and optimal mobility. This low-profile Type III ICW plate...

The PROTECH X-CAL DT C1 is a high-performing, low-profile special threat hard armor plate designed for in-conjunction-with (ICW) use. Independently tested, this Type III ICW plate defeats the M855...

The PROTECH X-CAL LP hard armor plates deliver thin, lightweight in-conjunction-with (ICW) protection against a range of special handgun and rifle threats. Independently tested with a variety of...

The PROTECH IMPAC MT Special Threat plates deliver comprehensive multi-threat defense against high-velocity handgun rounds as well as spike and edged blade instruments. Constructed from a durable...

The PROTECH IMPAC CT/DT Special Threat plates are engineered for the unique demands of corrections and duty environments. These plates protect against a variety of common duty rounds while also...

The PROTECH Tactical IMPAC HT1 Special Threat plates deliver reliable protection against high-velocity handgun threats and Spike Protection Level 1. Constructed from a durable steel and polyethylene...

Protect yourself with the IMPAC HT Special Threat polyethylene composite body armor plates. These ultra-lightweight single plates measure just 0.25 inches thick and deliver reliable protection...

The Matrix™ Ballistic Panel is one of Safariland’s most economical soft armor packages, offering an excellent balance of comfort, value, and flexibility in a hybrid design. It is ideal...