Colt

Colt Semi-automatic hammer with spring for AR-15 and M4-pattern rifles. Replacement or spare fire-control part for standard AR lowers. The hammer is steel with a black finish and the typical AR spur...

Colt recoil spring guide, part SP54729, for the 10mm Delta Elite with the two-spring recoil system. This guide rod is specific to that setup. It is plastic so it can absorb energy from the...

Police department trade-in Simunition conversion uppers for M16/M4/AR-15 pattern lowers. These are complete carry-handle A2-style uppers with the distinctive blue Simunition training barrel for...

Colt AR-15 / SMG Roll Pin, Conversion Adapter Spring, 9mm P/N: 95218 Factory Colt roll pin for the 9mm magazine conversion adapter. These are the pins that retain the conversion adapter in the AR...

Genuine Colt Trigger Guard Assembly, part number SP61970. This is the classic hinged AR-15 / M16 trigger guard that pivots downward for easier access when wearing gloves. The assembly comes complete...

Genuine Colt AR-15 Ejection Port Cover, part number SP64532. This is the ejection port cover (dust cover door) only — it does not include the hinge pin (rod), spring, or C-clip retainer...

Colt M4 Carbine 5.56mm Semi-Auto Rifle with 16" barrel, full length MLOK handguard and Vortex Sparc Red dot sight. These can come in LE or CR prefix, government profile barrels.   All police...

The Colt LE6921SOCOMCK M4A1 Upper Receiver Conversion Kit is a complete centerfire upper receiver group chambered in 5.56mm NATO, engineered to match the early Global War on Terror (GWOT) deployment...

These are used police trade in Colt carbine length handguard assemblies for M4/AR15 type rifles.

Colt M4 / AR-15 Trigger Guard Roll Pin – SP95106 (Spring Pin) – Sold Individually Genuine Colt SP95106 trigger guard roll pin (also known as a spring pin). This is the factory-spec...

Colt D-Bolt Spring SP50381 – Factory Original for D-Frame Revolvers Factory original Colt SP50381 D-Bolt Spring (also called the bolt spring or cylinder latch spring). This small internal...

Colt M16 / M4 / AR-15 Bolt Carrier Key SP61547 – 5.56mm Gas Key Factory Colt SP61547 Bolt Carrier Key (commonly called the Gas Key) for M16, M4, and AR-15 5.56mm bolt carrier assemblies. This...

Colt Take Down Pin Detent SP61698 – Lower Receiver Factory Colt SP61698 Take Down Pin Detent. This is the smaller detent used in the lower receiver to retain the rear take-down pin on M16, M4,...

Colt AR-15 Ejection Port Cover Hinge Pin SP61658 Factory Colt SP61658 Ejection Port Cover Hinge Pin. This pin secures the ejection port (dust) cover to the upper receiver on Colt AR-15, M16, and M4...

Colt CM556-14H-CK Upper Assembly The Colt CM556-14H-CK Upper Assembly is used on the M5 Carbine series of rifles. Maximum performance and ergonomics are at the forefront of the M5's design; utilizing...

The next evolution of Colt’s established carbine platform, the EPR II blends proven TDP components with certified MIL-SPEC materials, coatings, finishes, and proprietary processes, ensuring...

Colt AR-15 / M16 Rifle Length Handguard Assembly SP64508 Factory Colt SP64508 Rifle Length Handguard Assembly for AR-15 and M16-type rifles. This is the classic two-piece rifle-length polymer...

Colt 9mm SMG Semi-Auto Pistol Caliber Carbine | 10.5" Barrel SKU: CM9-10H-PCC Built on the legendary Colt platform, this 9mm Pistol Caliber Carbine delivers the reliability and craftsmanship that...

Colt Combat Commander – 9MM Optic Ready | O4942XE-OR The Colt Combat Commander has always represented the sweet spot in the 1911 lineup — compact enough for everyday carry, substantial...

Colt Combat Commander – .45 ACP Optic Ready | O4940XE-OR The Colt Combat Commander has earned its reputation as one of the most balanced carry and duty 1911s ever produced — and the...

Colt Government Model 1911 – .45 ACP Optic Ready | O1080CCU-OR The round that defined a generation of American combat doctrine, now paired with the rifle that carried it — the Colt...

Colt Government Model 1911 – 9MM Optic Ready | O1082CCU-OR Built on the legendary Government Model platform, the Colt O1082CCU-OR delivers the timeless 1911 form factor in a modern,...

Colt 403144 | CM9-10H 9mm Stripped Upper Receiver This is a stripped 10.5" 9mm (CM9-10H) upper receiver manufactured by Colt. Does not include BCG or charging handle. Built on a mil-spec forged...

Colt mil-spec AR15/M16/M4 low profile gas block. These DO NOT use set screws, sold as seen in photo not drilled for the installation pins. Gas blocks and barrels must be drilled together. Drilling...

Colt IAR6940 – 16" Commando Semi-Automatic Rifle "M4 Commando" model designation engraved on the lower receiver with LE serial number prefix. Rare and limited availability government exclusive...

Colt CR6921-EPR-PW Enhanced Patrol Rifle SKU: CR6921-EPR-PW UPC: 098289023728 Colt’s Enhanced Patrol Rifle in the pinned-and-welded configuration. Same 14.5" M4-profile duty barrel as the...

The Colt M4 LE6921EPR PW (Pinned and Welded) upper group is a complete AR-15 upper assembly built around a 14.5-inch barrel and chambered for .223 Rem/5.56 NATO. This kit ships with a bolt carrier...

These are Colt cam path insert button head Torx screws. Used with cam path inserts on 6940's to prevent aluminum upper wear. Sold Individually

These are Colt cam pin plates also known as cam path inserts used by 6940's to prevent wear on aluminum uppers. Made of hardened steel. If changing out you also need a button head torx screw Colt...

Factory Colt complete serialized bolt carrier group assembly for your AR15, M16 or M4 is the only BCG manufactured to truly meet and exceed all Mil Spec standards. Compatible with full-auto or...

This is an 11.5" upper receiver contracted and used by HRT and regional FBI SWAT teams. Comes with a Colt branded Radian Raptor charge handle, Magpul MBUS Pro Sights, Colt bolt carrier group, and...

Colt M4/AR15 Bolt Catch Roll Pin P/N: SP95105 Factory Colt roll pin / spring pin that retains the bolt catch in the M4, AR-15, and M16 lower receiver. Small service part. Sold individually...

Colt M4/AR15 Gas Tube Roll Pin P/N: SP95108 Factory Colt roll pin / spring pin used on the gas block or front sight base to secure the gas tube. Sold individually. Features Genuine Colt part number...

Highly desirable "M4 Commando" model designation engraved on the lower received with LE serial number prefix. Rare and limited availability government exclusive product. All police trade-ins are...

Proper "SCW Carbine" model designation engraved on the lower receiver with SCW suffix serial number (example: 123456SCW). Limited production of 800, exclusive LE/MIL product for ArmsUnlimited. Colt...

The Colt 6933-TPR Upper Assembly is used on the CQC Enhanced model rifle. This upper receiver allows for a free-floated barrel while featuring a full length MLOK handguard. The barrel is Colt's close...

The next evolution of Colt’s established carbine platform, the EPR II blends proven TDP components with certified MIL-SPEC materials, coatings, finishes, and proprietary processes, ensuring...

The next evolution of Colt’s established carbine platform, the EPR II blends proven TDP components with certified MIL-SPEC materials, coatings, finishes, and proprietary processes, ensuring...

Colt M4/M5 Burst Hammer Spring Colt Part #9349107 Sold Individually

COLT PIN, SPRING, 96906_MS16562-105 Colt Part # 95215 Sold Individually